English
Pусский
Français
EspañolMaintenance of paper plate machine equipment
In order to ensure the normal operation of the paper plate machine, daily maintenance and maintenance are indispensable and very necessary. The daily maintenance and maintenance of printing presses is an important task in printing equipment management.
Static maintenance
The static maintenance of the carton printing machine refers to the maintenance of the machine when the machine is at a standstill.
1. Establish rules and regulations for machine maintenance.
Offset printing machine maintenance should be based on the machine's instructions. Such as regular oil change, filter cleaning, regular inspection of machine accuracy, etc.
2. Strengthen the maintenance of important parts.
Gears, cams, sprockets, rollers and bearings are the most important parts of the printing press. Their maintenance should be different from other parts, because their accuracy changes will affect the final printing quality. Springs are the most commonly used parts for force balancing mechanisms on machines. Their performance directly determines the accuracy of the matching of moving parts. The springs must be sensitive and elastic, and the retention and irreversible plastic deformation affect the springs. Work is extremely unfavorable. The above problems need to be replaced immediately.
3. Carry out technical reforms and strengthen machine maintenance.
The maintenance of the machine requires that the machine is designed to take into account the convenience of machine maintenance. However, due to the complexity of the printing press, it is impossible to consider every factor, and the content of machine maintenance will also improve and change as the environment changes. Therefore, those structures that are not conducive to machine maintenance should be gradually improved without affecting normal operation.
Dynamic maintenance
The dynamic maintenance of the carton printing machine refers to the maintenance of the machine while the printing machine is in motion. Static machine maintenance is a substitute for machine dynamic maintenance, and the dynamic operation of the machine can in turn detect the level of machine static maintenance. The dynamic maintenance of the machine is very important.
The main contents of the dynamic maintenance of the carton printing machine are:
- Machine ready state detection. How the machine is ready can be checked by jog or crank. For example, tools and other items are stuck inside the machine; whether the printing plate is installed in a suitable position, if it is not suitable, it may damage the printing plate or bring great difficulties to finding the rules; whether the blanket is installed properly, if not, there will be It may cause printing failure, or damage the oak bark cloth or the machine in severe cases.
- The lubrication status of the machine. First, you can observe whether the oil circuit of the machine is unblocked through the oil standard. If there is no oil in the oil standard or the oil standard is not clearly observed, you should stop and carefully check the oil circuit for oil leakage. If a machine such as a sliding bearing is used, the low speed is not conducive to its lubrication, especially the lubrication and lubrication of jog or low speed operation. Therefore, before carrying out such operations, it is best to run the machine idling and lubricate. This is also a primary task that should be done before each item goes to work. The oil pump of some machines is driven by the main engine, so when it is reversed, the oil circuit will not only not be able to refuel, but will suck the oil from the oil circuit back to the tank. This is very dangerous, so it can be avoided. The lubrication of some important parts can also be detected by the temperature of the metal nearby. If the temperature is too high, it indicates that there is a problem with the lubrication.
- The shock during the operation of the machine. The smaller the impact during the operation of the machine, the better it is for printing, and it can also extend the replacement of the machine. Interchangeable printing pressure (pressure in a broad sense) is an important to ensure the smooth operation of the machine. Lowering the machine speed is another important condition for aligning the moment of inertia of the machine. The lower the speed of the machine, the smaller the moment of inertia, so the machine must be made. Always in high-speed operation. The above aspects are only part of the daily maintenance and maintenance of the printing press. The quality of the daily maintenance and maintenance of the printing press directly affects the replacement of the printing press and product quality, so it cannot be taken lightly.
The maintenance materials for carton printers and related equipment include: lubricating oil-such as snow oil, chain tooth oil, pressure gear box oil, etc.
Cleaner-such as post cleaner, ink roller cleaner, oil pipe and oil circuit cleaner, etc.
Anti-rust agent—used to prevent rust and lubricate the table top of the paper cutter and the cutter.
Company Profile
Established in 2009, RUIAN MINGYUAN MACHINERY CO.,LTD is a professional manufacturer and exporter that is concerned with the design, development and production of Paper Cup Machine, Paper Straw Machine, Paper Hamburger Box Forming Machine, Paper Plate Machine, Plastic lid machine, Paper Cake Tray machine various types of containers and packing full set equipment.
We are located in "China Packaging Machinery City" - Ruian City, with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
www.mingyuanpapercupmakingmachine.com
Email: mingyuanmachine@gmail.com
Mobile/WhatsApp: +86 15157799231
Tel: +86 577-65567060
